Straight-Through
Cabling
CAT 5 UTP cabling usually
uses only four wires when sending and receiving information on the network. The
four wires, which are used, are wires 1, 2, 3, and 6. When you configure the
wire for the same pin at either end of the cable, this is known as a
straight-through cable.
Cross-Over
Cabling
If we use want to connect
two computers together with a straight-through cable, we can see that, the
transmit pins will be connected to transmit pins and receive pins will be
connected to receive pins. We will not be able to connect two computers or two
hubs together using straight through cables.
0 comments:
Post a Comment